The talent on Etsy never ceases to amaze me. Here are some awesome artisansL
http://www.etsy.com/treasury/4d1a7d923c236d914d402ab4/soft-white?index=1
Jan Arabas Fine Art
Fine Art Prints, made with love and care. Monotypes, installation art, experimental prints a specialty.
Wednesday, December 29, 2010
Saturday, December 18, 2010
New Work in my Etsy Store
I have some fab new lamps and pillows in my Etsy store. The pillow textiles are from all over the world--fine silks from Cambodia, cotton/linen blends from France, and wonderful prints from America too.
The new lamps range from the whimsical--the Flying Fish Lamp--to the sophisticated--the Batik Circles Lamp, with vintage style--the Fine Dining Lamp. Hope you take a look. http://www.etsy.com/shop/jarabas
The new lamps range from the whimsical--the Flying Fish Lamp--to the sophisticated--the Batik Circles Lamp, with vintage style--the Fine Dining Lamp. Hope you take a look. http://www.etsy.com/shop/jarabas
Tuesday, April 13, 2010
New digital photos on my website
Hi just loaded some digital prints on my website. Please take a look.
http://janarabas.com/workszoom/432578
http://janarabas.com/workszoom/432578
Sunday, April 11, 2010
I'm in a Show
Black & White
Brickbottom Artists Association Members' Exhibition
Exhibiting Artists: J. Arabas, S. Autor, D. J. Cain, Campbell, P. Cobb, K. Chapman, P. Cutler, S. Darling, M. Dioguardi, G. Gabin, L. Fiore, M. Forte, J. Fries, W. Gilbert, M. Hamlen, E. Kahn, C. Kaplan, B. Kipp, J. Lainoff, P.A. Lamb, P. Lim, Cyn Maurice, D. Olin, S. Packer, P. Parda, D. Rocha, A. Russell, J. Sandman, S. Schmidt, J. Shepley, D. Sholl, P. Stevens, M. Stone, R. Thurston, B. Turville, T. Wilson
Thursday, April 22 – Saturday, May 22, 2010
Opening Reception: Sunday, April 18, 6-8PM
Gallery Hours: Thursday-Saturday, noon – 5:00, withextended gallery hours during Somerville Open Studios, Saturday and Sunday, May 1 & 2, 12-6pm.
Wednesday, March 31, 2010
Digital prints in my Etsy store
I am starting to offer 8" x 10" digital reproductions of some of my monotypes in my Etsy store at a very affordable price. I am using a beautiful archival quality Asian paper and archival Epson inks.
Horse of Course is the first offering.
Also available: a line of custom monotypes. You can order your favorite animal, hand drawn and printed, 8" x 10" on lovely Hahnemuhle paper for a very attractive price. Interested? Visit me at
http://www.etsy.com/shop/jarabas
Horse of Course is the first offering.
Also available: a line of custom monotypes. You can order your favorite animal, hand drawn and printed, 8" x 10" on lovely Hahnemuhle paper for a very attractive price. Interested? Visit me at
http://www.etsy.com/shop/jarabas
Monday, March 29, 2010
Ivory bill Woodpecker Monotype Print
Here's a new monotype, The Ivory bill Woodpecker.
The story of present day ornithologists' search for the Ivory bill woodpecker in the Big Woods of Arkansas is a good read. Cornell University's Ornithology website provides a very detailed account at http://www.birds.cornell.edu/ivory/evidence/segments/upperwing
The story of present day ornithologists' search for the Ivory bill woodpecker in the Big Woods of Arkansas is a good read. Cornell University's Ornithology website provides a very detailed account at http://www.birds.cornell.edu/ivory/evidence/segments/upperwing
Sunday, March 28, 2010
New prints
Some new prints are hanging in the studio.
I have a show coming up at a biotech company called Cell Signaling.
I thought it would be an interesting challenge to try to come up with a monotype series about cell signaling --with a small c, small s-- for this show, whose primary audience will be scientists.
So, what is cell signaling? My untutored understanding is that cells communicate with other cells by releasing signaling chemicals. Sometimes they do this while touching each other, other times they are floating in an intracellular fluid (I imagine this like a sort of swimming pool for cells.)
If you'd like to see some scientific charts of this from Cell Signaling the company--with a large C, large S--take a look at this link: http://www.cellsignal.com/reference/pathway/index.html
So how to translate this to a work of art? What I noticed about the scientific charts is all the colored ellipses and circles that represent the chemicals and cells. Besides encoding chemical information, these charts can be seen as a set of color relationships, or shapes in spatial relationships. That is something an artist can work with, but perhaps not enough for me. I am a realist. So I decided to think artistically about another aspect of cell signaling. Cell Signaling says that their mission is, "... to provide the means to understand the signaling aberrations that underlie diseases, including cancer, diabetes and neurodegenerative diseases."
Aberrations that underlie diseases. I just finished reading a very good book, The Bird: A Natural History of Who Birds Are, Where They Came From, and How They Live by Colin Tudge. While Tudge doesn't exactly address diseases, he does write about all sorts of aberrations, ranging from the mutations that changed dinosaurs into birds to the mass extinction of the dodo and the passenger pigeon by human hands. This connection figures into my artistic thinking. I am making extinct birds covered with patterns of colored circles--an artistic response to the idea of cell signaling. It does not make sense in any scientific way, but art makes connections in other ways.
I have a show coming up at a biotech company called Cell Signaling.
I thought it would be an interesting challenge to try to come up with a monotype series about cell signaling --with a small c, small s-- for this show, whose primary audience will be scientists.
So, what is cell signaling? My untutored understanding is that cells communicate with other cells by releasing signaling chemicals. Sometimes they do this while touching each other, other times they are floating in an intracellular fluid (I imagine this like a sort of swimming pool for cells.)
If you'd like to see some scientific charts of this from Cell Signaling the company--with a large C, large S--take a look at this link: http://www.cellsignal.com/reference/pathway/index.html
So how to translate this to a work of art? What I noticed about the scientific charts is all the colored ellipses and circles that represent the chemicals and cells. Besides encoding chemical information, these charts can be seen as a set of color relationships, or shapes in spatial relationships. That is something an artist can work with, but perhaps not enough for me. I am a realist. So I decided to think artistically about another aspect of cell signaling. Cell Signaling says that their mission is, "... to provide the means to understand the signaling aberrations that underlie diseases, including cancer, diabetes and neurodegenerative diseases."
Friday, March 26, 2010
Printing the Solar Plate
Today I printed the Pool of Tears solar plate. I've photographed the process, so you can see how the print is made. First I assembled Hanhemuhle paper, Akua Intaglio Carbon Black ink, my solar plate and an old phone book for wiping the plate.
Next I dampened my paper and placed it between two cotton blotters. This opens up the dried paper fibers so they can accept ink. I always think of the fibers like little macaroni tubes. When they are plump, and then blotted, they are nice big hollows. The press then can push a lot if ink inside when the impression is made.
Now I ink the plate. I rub Akua ink into all the washed out areas of the solar plate matrix with my fingers. These areas are all below the surface of the matrix.
Now the surface of the plate is wiped clean. With Akua inks this is best done with some old phone book pages. I tell my students to remember how Mr Miyagi taught the Karate kid to wax the car--make circles across the surface of the plate.
Here is the inked plate ready to print on the press bed.
Next I position the plate on the registration grid and place the damp Hanhemuhle paper on top of it.
Now the press blankets are lowered on top of the paper. The pressure screws are adjusted. Finally, I can crank the press bed through the rollers. The top and bottom rollers give everything between them--plate and paper-- a good squeeze to transfer ink from plate to paper.
Here is the result--the impression hot off the press, so to speak.
These last images are the final print hanging on the drying wall and a close up of the image.
This print is for sale in my Etsy store if you want a copy. I decided to make a limited edition of 20. The images measures 4" x 6" on an 8" x 10" sheet. The price is $20.00 per print.
Jan
Next I dampened my paper and placed it between two cotton blotters. This opens up the dried paper fibers so they can accept ink. I always think of the fibers like little macaroni tubes. When they are plump, and then blotted, they are nice big hollows. The press then can push a lot if ink inside when the impression is made.
Now I ink the plate. I rub Akua ink into all the washed out areas of the solar plate matrix with my fingers. These areas are all below the surface of the matrix.
Now the surface of the plate is wiped clean. With Akua inks this is best done with some old phone book pages. I tell my students to remember how Mr Miyagi taught the Karate kid to wax the car--make circles across the surface of the plate.
Here is the inked plate ready to print on the press bed.
Next I position the plate on the registration grid and place the damp Hanhemuhle paper on top of it.
Now the press blankets are lowered on top of the paper. The pressure screws are adjusted. Finally, I can crank the press bed through the rollers. The top and bottom rollers give everything between them--plate and paper-- a good squeeze to transfer ink from plate to paper.
Here is the result--the impression hot off the press, so to speak.
These last images are the final print hanging on the drying wall and a close up of the image.
This print is for sale in my Etsy store if you want a copy. I decided to make a limited edition of 20. The images measures 4" x 6" on an 8" x 10" sheet. The price is $20.00 per print.
Jan
Thursday, March 25, 2010
Making a solar plate
Here are the steps I use to create a solar plate. I will use this plate in a new print series I am working on for my upcoming show.
The first step is to prepare a drawing. I used pencil to create this sketch of a scene in Lewis Carroll's Alice in Wonderland--the pool of tears. I drew the Dodo, a duck, a lory and an eaglet.
The next step is to translate the drawing to a black and white image on a transparency. The transparency will be used to expose the light sensitive solar plate. I drew with a Sharpie fine point and scratched into the ink with an Xacto.
Now I get the exposure frame ready. The frame keeps the transparency immobile while the plate is exposed, and insures contact between the plate and the image (If the transparency is not in full contact with the plate, the exposed image will be blurry.) Here are the various parts--1/8 inch glass, foam rubber, 1/2 inch plywood, and 4 clamps.
Next, I unwrapped the solar plate (In the picture above it is wrapped in black plastic to protect it from light) and positioned it on the foam--the orange side of the plate faces up (the plywood board is under the foam.) The transparency goes on top of the plate and the glass is placed on top of everything. I clamped the exposure frame together. I try to do this efficiently so that the time from unwrapping the plate to walking outside to make the exposure is under a minute.
Here is the exposure unit outside. I am making a 90 second exposure for this plate. The time was 12 noon on a partly sunny day.
The last step is washing out the plate. I have placed the plate under a stream of lukewarm water and will gently rub it all over with my fingertips for about 5 minutes. This washed away the soft emulsion left under the ink drawing on the transparency. Exposure to the sun has hardened the rest of the plate.
During the next step--inking and printing-- I will push ink into the washed out areas and wipe the surface of the plate clean. When the plate is cranked though the press with a sheet of print paper on top, the ink in the washed out areas will be transferred to the paper. This process is called intaglio.
I will post photos of the inking and printing next. Probably over the weekend.
Jan
The first step is to prepare a drawing. I used pencil to create this sketch of a scene in Lewis Carroll's Alice in Wonderland--the pool of tears. I drew the Dodo, a duck, a lory and an eaglet.
The next step is to translate the drawing to a black and white image on a transparency. The transparency will be used to expose the light sensitive solar plate. I drew with a Sharpie fine point and scratched into the ink with an Xacto.
Now I get the exposure frame ready. The frame keeps the transparency immobile while the plate is exposed, and insures contact between the plate and the image (If the transparency is not in full contact with the plate, the exposed image will be blurry.) Here are the various parts--1/8 inch glass, foam rubber, 1/2 inch plywood, and 4 clamps.
Next, I unwrapped the solar plate (In the picture above it is wrapped in black plastic to protect it from light) and positioned it on the foam--the orange side of the plate faces up (the plywood board is under the foam.) The transparency goes on top of the plate and the glass is placed on top of everything. I clamped the exposure frame together. I try to do this efficiently so that the time from unwrapping the plate to walking outside to make the exposure is under a minute.
Here is the exposure unit outside. I am making a 90 second exposure for this plate. The time was 12 noon on a partly sunny day.
The last step is washing out the plate. I have placed the plate under a stream of lukewarm water and will gently rub it all over with my fingertips for about 5 minutes. This washed away the soft emulsion left under the ink drawing on the transparency. Exposure to the sun has hardened the rest of the plate.
During the next step--inking and printing-- I will push ink into the washed out areas and wipe the surface of the plate clean. When the plate is cranked though the press with a sheet of print paper on top, the ink in the washed out areas will be transferred to the paper. This process is called intaglio.
I will post photos of the inking and printing next. Probably over the weekend.
Jan
Sunday, March 21, 2010
Who else belongs in Alice's pool of tears?
I am trying to decide what other creatures belong in the pool of tears. I need suggestions.
Aurthur Rackham included a stork, a mouse, a crab, a raven, an otter and several unidentified birds. Kiki Smith drew a swan a mallard, a monkey, an owl, many birds and a couple of hard to identify critters--a sort of mousey thing, a hariy ape? and a pointy nosed fox-like animal. Take a look at the original illustration from Lewis Carroll's book. Just Alice and the mouse.
Here is the passage from Carroll.
"It was high time to go, for the pool was getting quite crowded with the birds and animals that had fallen into it: there was a Duck and a Dodo, a Lory and an Eaglet, and several other curious creatures."
Let me know what you would include?
Thanks,
Jan
Aurthur Rackham included a stork, a mouse, a crab, a raven, an otter and several unidentified birds. Kiki Smith drew a swan a mallard, a monkey, an owl, many birds and a couple of hard to identify critters--a sort of mousey thing, a hariy ape? and a pointy nosed fox-like animal. Take a look at the original illustration from Lewis Carroll's book. Just Alice and the mouse.
Here is the passage from Carroll.
"It was high time to go, for the pool was getting quite crowded with the birds and animals that had fallen into it: there was a Duck and a Dodo, a Lory and an Eaglet, and several other curious creatures."
Let me know what you would include?
Thanks,
Jan
Subscribe to:
Posts (Atom)